Tailstock untuk memegang atau menya

Tailstock untuk memegang atau menyangga benda kerja pada bagian ujung yang berseberangan dengan chuck (pencekam) pada proses pemesinan di mesin bubut.
Lead crew adalah poros panjang berulir yang terletak agak dibawah dan sejajar dengan bangku, memanjang dari kepala tetap sampai ekor tetap. Dihubungkan dengan roda gigi pada kepala tetap dan putarannya bisa dibalik. Dipasang ke pembawa (carriage) dan digunakan sebagai ulir pengarah untuk membuat ulir saja dan bisa dilepas kalau tidak dipakai.
Feedrod terletak dibawah ulir pengarah yang berfungsi untuk menyalurkan daya dari kotak pengubah cepat (quick change box) untuk menggerakkan mekanisme apron dalam arah melintang atau memanjang.
Carriage terdiri dari tempat eretan, dudukan pahat dan apron. Konstruksinya kuat karena harus menyangga dan mengarahkan pahat pemotong. Dilengkapi dengan dua cross slide untuk mengarahkan pahat dalam arah melintang. Spindle yang atas mengendalikan gerakan dudukan pahat dan spindle atas untuk menggerakkan pembawa sepanjang landasan.
Toolpost digunakan sebagai tempat dudukan pahat bubut, dengan menggunakan pemegang pahat.
Headstock adalah tempat terletaknya transmisi gerak pada mesin bubut yang mengatur putaran yang dibutuhkan pada proses pembubutan.

Hasil (Inggris) 1:

Tailstock to hold or support the workpiece on the end opposite the chuck (pencekam) on the process of machining on the lathe. Lead crew is a long shaft threaded which lies a bit below and parallel to the bench, extending from head to tail remains fixed. Associated with the gears on the head fixed and reversible rotational. Mounted to the carrier (carriage) and used as steering screw to make the screw only and could be removed if not used. Feedrod is located under the Steering screw that serves to transmit power from the modifier quick (quick change box) to drive the mechanism of apron in a direction transverse or lengthways. Carriage comprises eretan, place holder chisel and an apron. Its construction is strong because of the need to support and drive the chisel cutters. Equipped with two cross slides to drive the chisel in the transverse direction. The top of the control spindle movement holder chisel and spindle carrier to move up along the runway. Toolpost is used as a place holder chisel lathe, using a chisel holder. The headstock is the place contains the transmission of motion on a lathe which set the round is needed on the process of pembubutan.

Hasil (Inggris) 2:

Tailstock to hold or support the workpiece on the end opposite the chuck (pencekam) in the machining process in a lathe.
Lead crew is long threaded shaft that is located slightly below and parallel to the bench, extending from head to tail remains fixed. Connected with the gear on the fixed head and rotation can be reversed. Mounted to a carrier (carriage) and is used as a threaded steering to make the screw only and can be removed when not in use.
Feedrod located below the threaded steering serves to channel the power of the converter box quickly (quick change box) to move the mechanism apron in a direction transverse or longitudinal .
Carriage consists of a sled, chisel holder and apron. Strong construction is due to be supporting and directing the cutting chisel. Equipped with two cross slides to direct the chisel in the transverse direction. Spindles on controlling the movement of the chisel holder and spindle top to move the carrier along the runway.
Toolpost used as a place holder lathe chisel, using a chisel holder.
The headstock is where lay the transmission of motion on a lathe that regulates rotation needed in the process of turning.