3.6 Instrumen PenenlitianAlat dan b

3.6 Instrumen Penenlitian
Alat dan bahan yang digunakan dalam pelaksanaan penelitian adalah sebagai berikut :
a. Pesawat sinar-X
1) Merk tabung : Biomedical International
2) Type : VZW2556RE5-85
3) No. Seri : CPD22023E15
4) kV maksimal : 125
5) mA : 450
b. Digital Multimeter Test Tool merek Cobia
c. Meteran
d. Alat Tulis
e. Kamera
f. Kalkulator
3.7 Metode Pengumpulan Data
3.7.1 Metode pengumpulan data yang digunakan :
a. Observasi Partisipasif
Peneliti melakukan pengamatan secara langsung dan melakukan pengujian keluaran kVp pada sinar-X konvensional di Instalasi Radiologi RSUD DR. R. Soetijono Blora. Sehingga peneliti dapat mengetahui hasil dari pengujian tersebut.
b. Dokumentasi
Peneliti melakukan pengambilan gambar hasil pengujian di setiap keluaran tegangan tabung yang tertera di layar digital multimeter test tool (kVp meter).
3.7.2 Prosedur Pengujian Keluaran kVp
a. Mempersiapkan alat yang akan digunakan untuk pengujian, yakni :
1) Pesawat sinar-X merk Biomedical International (BMI)
2) Digital Multimeter Test Tool merk Cobia
4) Meteran
5) Alat Tulis
6) Kamera
7) Kalkulator
b. Prosedur pengujian keluaran kVp
1) Menghidupkan alat ukur digital multimeter test tool, dengan cara menekan tombol “ON” selama 2 detik, tunggu sampai layar monitor menyala.
2) Melakukan setting dengan cara menekan tombol panah kanan sehingga muncul “kV”. Mengecek nilai kV dalam jangka 0,00.
3) Letakkan alat ukur digital multimeter test tool di atas meja pemeriksaan.
4) Atur jarak antara tabung sinar-x dengan detektor digital multimeter test tool sejauh 100 cm menggunakan meteran.
5) Atur center point berkas sinar kolimator berada tepat di pertengahan detektor digital multimeter test tool.
6) Atur luas luas lapangan penyinaran seluas lapangan detektor digital multimeter test tool yaitu 5 cm x 5 cm.
7) Mengatur nilai eksposi sesuai ketentuan berikut :

Hasil (Inggris) 1:

3.6 the instrument PenenlitianTools and materials that are used in the implementation of the research are as follows: a. Plane x-ray1) brands of tubes: Biomedical International2) Type: VZW2556RE5-883) No. Series: CPD22023E154) kV maximum: 1255) mA: 450b. Digital Multimeter Test Tool brand Cobiac. Metered d. Stationery e. the cameraf. Calculator2.3 Data Collection Methods3.7.1 data collection Methods were used:a. Observation PartisipasifResearchers conducting observations directly and perform testing ex. kVp on conventional x-ray Installation Radiology HOSPITALS DR. R. Soetijono Relief. So that researchers can find out the results of the test.b. DocumentationResearchers conducting a shooting test results at each output tube voltage shown on screen digital multimeter test tool (kVp meters).3.7.2 kVp Output testing proceduresa. Prepare a tool to be used for testing, including:1) Plane x-ray brand Biomedical International (BMI)2) Digital Multimeter Test Tool brand Cobia 4) Meter5) Stationery6) camera7) Calculator b. testing procedure output kVp1) switching on the measuring instrument digital multimeter test tool, by pressing the "ON" button for 2 seconds, wait until the monitor turns on.2) Do the setting by pressing right arrow key so that it appears "kV". Check the value of kV within 0.00.3) position the measuring instrument digital multimeter test tool on the table checks.4) Adjust the distance between the x-ray tube with the detector digital multimeter test tool as far as 100 cm using the meter.5) set the center point of the ray kolimator file is right in the middle of the detector digital multimeter test tool.6) set up vast acres of the detector field shines field digital multimeter test tool that is 5 cm x 5 cm.7) set the value of eksposi in accordance with the following:

Hasil (Inggris) 2:

3.6 Instruments Penenlitian
Tools and materials used in the conduct of the study are as follows:
a. X-ray plane
1) Brands tube: Biomedical International
2) Type: VZW2556RE5-85
3) No. Series: CPD22023E15
4) kV maximum: 125
5) mA: 450
b. Digital Multimeter Test Tool brand Cobia
c. Meter
d. Stationary
e. Camera
f. Calculator
3.7 Data Collection Methods
3.7.1 Data collection methods were used:
a. Participatory Observation
Researchers conducted direct observation and testing kVp output on a conventional X-ray Radiology at Hospital DR. R. Soetijono Blora. So the researchers can determine the outcome of the test.
B. Documentation
Researchers shooting test results at each output tube voltage shown on the screen digital multimeter test tool (kVp meters).
3.7.2 Output kVp Test Procedure
a. Preparing tools that will be used for testing, namely:
1) Aircraft X-ray brands Biomedical International (BMI)
2) Digital Multimeter Test Tool brand Cobia
4) Meter
5) Stationery
6) Camera
7) Calculator
b. Output test procedure kVp
1) Turn the measuring instrument digital multimeter test tool, by pressing the "ON" for 2 seconds, wait until the screen turns on.
2) Setting by pressing the right arrow button that appears "kV". Check the value of 0,00 kV term.
3) Place the measuring instrument digital multimeter test tool on the examination table.
4) Set the distance between the x-ray tube with a digital multimeter detector test tool as far as 100 cm using the meter.
5) Adjust the center point beam beam collimators are right in the middle of a digital multimeter detector test tool.
6) Set the wide breadth of field radiation detector field measuring digital multimeter test tool which is 5 cm x 5 cm.
7) Set the value eksposi in accordance with the following: