Pertama perakitan modul / pemasanga

Pertama perakitan modul / pemasangan komponen elektronika ke PCB. Proses ini membutuhkan ketelitian setelah pengetahuan untuk nilai komponen. Terutama pada komponen pasif dan komponen aktif. Jikalau pemasangan komponen salah atau kebalik akan berpengaruh pada hasil akhir. Setelah selesai pemasangan selanjutnya proses penyolderannya menggunakan solder celup proses ini sangat menentukan baik buruknya kualitas produk, penyolderannya hanya membutuhkan waktu 1,5 detik. Karna suhu kompor solder sangatlah panas, jikalau pengerjaannya lama bisa mengakibatkan terbakarnya komponen dan rusak.

Hasil (Inggris) 1:

The first module assembly / installation of electronic components to the pcb. This process requires precision after knowledge of the value of the component. primarily on passive components and active components. if the installation of wrong or opposite component will affect the final result.after subsequent installation of the soldering process using the dip soldering process is to determine the merits of quality products, soldering only takes 1.5 seconds. because the temperature of the solder is very hot stove, if the process is long and can cause burning of the defective component.

Hasil (Inggris) 2:

The first Assembly of the module/electronic components to the PCB. This process needs a thoroughness after knowledge for the value of the component. Especially on passive and active components components. If installation is incorrect or kebalik components will affect the end result. After you have finished the installation process using the soldering soldering then dye process is crucial both to poor product quality, soldering only takes 1.5 seconds. Because the temperature of the stove is very hot, the solder, if this work could lead to the burning of old and damaged components.