1. Sambungkan kabel power pada stop

1. Sambungkan kabel power pada stop kontak, Tekan tombol "ON / OFF"
2. Buka liq Autoclave masukkan aquadest sampai tanda batas. Step 1: isi botol penampung dengan aquadest. Step 2 : Pasang selang tepat pada botol penampung 2
3. Masukkan alat /media yang akan disterilkan ke dalam gasket
Beri indikator steriiisasi
Tutup lid autoclave ,geser liq ke arah "LOCK"
4. Tekan "MODE"(liquid /media &air,Solid/ bahan&peralatan).
Tekan "SET/ENT" utk mengatur settingan suhu & waktu(121⁰C±20 menit
5. Selesainya waktu sterilisasi ditandai dg alarm dan suhu warm 97⁰C.
Tekan tombol "START/STOP",geser liq ke arah "UNLOCK" buka lid autoclave
Periksa indikator ,ambil medium/peralatan yg telah disterilkan

Hasil (Inggris) 1:

1. connect the power cable to the socket, press the "on / off"
2. open liq enter autoclave distilled water to mark boundaries. Step 1: Fill the bottle with distilled water reservoirs. Step 2: plug the hose right at the reservoir bottle 2
3. insert tools / media to be sterilized into the gasket steriiisasi

give indicators autoclave lid closed, liq sliding toward "lock"
4. press the "mode" (liquid / water media &,solid / materials & equipment).
press "set / ent 'for regulating the setting temperature & time (121 ⁰ C ± 20 min
5. completion time of sterilization is accomplished by using an alarm and temperature warm 97 ⁰ c.
press the" start / stop ", sliding liq toward the "unlock" the autoclave lid open
check the indicator, take a medium / equipment that has been sterilized

Hasil (Inggris) 2:

1. connect the power cable on the stop contact, press the "ON/OFF"
2. Go to aquadest to enter the Autoclave liq sign limits. Step 1: fill the bottle with the aquadest reservoir. Step 2: attach the hose right on holding bottles of 2
3. Insert the tool/media that will be sterilized into gaskets
steriiisasi
indicators Give the lid lid autoclave, liq sliding towards "LOCK"
4. Press "MODE" (liquid/media & water,Solid/materials equipment &).
Press "SET/ENT" for regulating temperature setting & time (121 ⁰ C ± 20 minutes
5. The completion of the sterilization time is marked with an alarm and temperature warm 97 ⁰ c.
press the "START/STOP", slide liq toward "UNLOCK" open lid autoclave
Check indicator, grab a medium/equipment has been sterilized yg