1. Mengumpulkan bahan baku untuk me

1. Mengumpulkan bahan baku untuk membuat emas batanganAda dua bahan baku yang digunakan. Pertama, emas berupa bongkah atau biji kecil dengan kadar kemurnian 90% didapat dari tambang.Kedua perhiasan emas yang patah atau rusak ata yang sudah tidak dipakai lagi dan punya kadar emas 37% murni.2. Proses pencucianEmas batangan dicuci dalam larutan kimia khusus untuk meluruhkan logam lain hingga konsentrasi emas murninya mencapai 99,99%.Larutan kimia pertama akan meluruhkan besi dan logam utama yang tercampur ke dalam emas.Larutan yang kedua akan meluruhkan silver atau perak yang terdapat dalam emas.Hingga akhirnya hanya tersisa emas murni di dalam bongkahan emas.

Hasil (Inggris) 1:

1. Gather the raw materials to make gold bars

There are two raw materials used. First, the gold in the form of lumps or small seeds with a purity of 90% obtained from the mine.

Both gold jewelry is broken or damaged ata which have fallen into disuse and had a gold content of 37% pure.

2. The washing process

Gold bars are washed in a special chemical solution in order to remove other metals to a concentration of 99.99% pure gold.

The first chemical solution to break down the iron and primary metals were mixed into gold.

The second solution would shed the silver or silver contained in gold.

Until finally the only remaining pure gold in the nugget.

Hasil (Inggris) 2:

1. Collecting raw materials to make gold bullion

There are two raw materials used. Firstly, gold in the form of a hunk or small seed with a purity rate of 90% obtained from the mine.

Both jewelry gold that is broken or damaged ATA is not used anymore and has a gold level 37% pure.

2. Washing process

Gold bars are washed in a special chemical solution to shed other metals until the gold concentration reaches 99.99%.

The first chemical solution would shed the main iron and metal blended into gold.

The second solution would shed silver or silver in gold.

Until finally only pure gold remains in chunks of gold.