Thermographyjuga dapat digunakan se

Thermographyjuga dapat digunakan sebagai cara untuk menginspeksi peralatan listrik atau mekanis untuk menentukan ketidaknormalan fungsi dengan memperoleh pola panasnya. Metode Inspeksi ini didasarkan pada kenyataan sebagian besar komponen di dalam suatu system yang akan menunjukkan kenaikan atau penurunan temperatur jika terjadi malfungsi.
Peningkatan temperatur dalam rangkaian listrik mungkin disebabkan oleh koneksi kendor atau sekring yang mengalami beban lebih. Dengan Thermography kita dapat mengamati pola panas pada saat komponen sistem beroperasi, kerusakan atau gangguan dapat dilokalisir dan keparahannya dapat langsung dievaluasi. Kontak secara fisik terhadap sistem tidak lagi diperlukan, inspeksi dengan Thermography dapat dilakukan dalam kondisi beroperasi penuh tanpa menghasilkan kerugian operasi atau menghentikan operasi tersebut

Hasil (Inggris) 1:

Thermographyjuga can be used as a way to inspect the mechanical or electrical equipment to determine disorders of functions by acquiring the heat pattern. This Inspection method is based on the fact most of the components in a system that will show the increase or decrease in temperature in case of malfunctions.The increase in temperature in the circuit probably caused by loosened connection or fuse that is experiencing the overload. With Thermography hot patterns we can observe at the time operating system components, damage or disturbance may be dilokalisir and keparahannya can be directly evaluated. The physical contact of the system is no longer required, Thermography inspection can be done in a fully operational condition without producing an operating loss or stop the operation

Hasil (Inggris) 2:

Thermographyjuga can be used as a way to inspect electrical or mechanical equipment to determine abnormalities in the function to obtain a heat pattern. This inspection method is based on the fact most of the components in a system that will show the increase or decrease in temperature in case of malfunctions.
A temperature increase in the electric circuits may be caused by loose connections or fuses subjected to loads more. With thermography we can observe patterns of heat when operating system components, damage or disruption could be contained and severity can be directly evaluated. Physical contact of the system is no longer needed, the inspection with thermography can be done in conditions of full operation without generating operating losses or stop the operation