BUKA KEDUA U-BOLT ( Clamp Spring )

BUKA KEDUA U-BOLT ( Clamp Spring ) SATU PER SATU DENGAN CARA MELEPAS BAUT CLAMP, SETELAH BAUT LEPAS KEMUDIAN BOLT DIPUKUL KE ATAS SAMPAI BAGIAN BAUTNYA RATA DENGAN TRUNION KEMUDIAN U-BOLT BAGIAN ATAS DIUNGKIT DENGAN PENGUNGKIT ( stang besi ) SAMPAI LEPAS KEMUDIAN BUKA BAUT CENTRE PIN.

Hasil (Inggris) 1:

open both u-bolt (spring clamp) one at a time by disconnecting the clamp bolts, then bolt after bolt struck off up until the part the bolt flush with the trunion then u-bolt to the top of the tilt lever (handlebar iron) to off and then open the bolt center pin.

Hasil (Inggris) 2:

OPEN the TWO u-bolt (Clamp Spring) ONE at a TIME by MEANS of a CLAMP, BOLT TOOK OFF AFTER the BOLT LOOSE THEN the BOLT STRUCK UP to 24 BAUTNYA FLAT to the TRUNION THEN UPPER u-bolt DIUNGKIT with LEVERS (handlebar) to OFF and THEN OPEN the BOLT CENTRE PIN.