Cara Kerja:Gantry 1: ChargingAntena

Cara Kerja:
Gantry 1: Charging
Antena -> kirim pesan ke IU/OBU.
IU -> kirim data obu code, smartcard number, dan sisa deposit, dll ke antena
Antena -> mengirimkan permintaan mendebit kepada OBU
Gantry 1 -> Gantry 2: Verify Validity dan Vehicle detection
Data OBU dikirim ken Roadside controller.(RC). Pada RC akan melakukan verifikasidata OBU tsb.
Pada saat mendekati Gantry 2 sensor medeteksi lokasi dan lebar kendaraan yang akan diteruskan ke RC.
Gantry 2: Verify Charging dan Violation Enforcement
Jika data OBU benar maka antena akan menerima data yang benar dan dikirim ke central system melalui RC
Jika ditemukan pelanggaran maka RC akan memerintahkan kamera pada gantry 1 untuk mengambil gambar.
Kamera akan merekan kendaraan dan imagenya dikirim ke Central system.

Hasil (Inggris) 1:

How it works:
Gantry 1: Charging
Antenna >-send a message to the IU/OBU.
IU-> obu data code, send a smartcard number, and time deposits, etc. to the antenna the antenna-
> sends a request to debit the OBU
Gantry 1-> Gantry 2: Verify Validity and Vehicle detection
OBU Data sent ken Roadside controller.(RC). The RC will conduct OBU verifikasidata tsb.
Upon approaching the Gantry 2 sensor medeteksi the location and width of the vehicle, which will be forwarded to RC.
Gantry 2: Verify Charging and Violation Enforcement
OBU data If true then the antenna will receive data and sent to the central system through RC
if found infringement then the RC will command the camera on the gantry 1 to take pictures.
The cameras will record vehicles and its image is sent to the Central system.

Hasil (Inggris) 2:

How it Works:
Gantry 1: Charging
Antenna -> send a message to the IU / OBU.
IU -> send the data Obu code, smartcard number, and the rest of the deposit, etc. to the antenna
Antennas -> sends a request to debit the OBU
Gantry 1 -> Gantry 2: Verify Validity and Vehicle detection
OBU data sent ken Roadside controller. (RC). In the RC will do verifikasidata OBU TSB.
During approached Gantry 2 sensors detect the location and width of the vehicle which will be forwarded to the RC.
Gantry 2: Verify Charging and Violation Enforcement
OBU If the data is correct then the antenna will receive the correct data and sent to the central system via RC
If a violation is found, the RC will command the camera to take a picture of gantry 1.
cameras are recording the vehicle and his image will be sent to the Central system.