Penggunaan Slip yang benarMengatur Slip Pipa Bor a) Pasang slip dengan terjemahan - Penggunaan Slip yang benarMengatur Slip Pipa Bor a) Pasang slip dengan Inggris Bagaimana mengatakan

Penggunaan Slip yang benarMengatur


Penggunaan Slip yang benar

Mengatur Slip Pipa Bor
a) Pasang slip dengan telapak tangan menghadap ke atas.

b) Ketika gerakan pipa bor ke bawah telah berhenti, bungkus slip di sekitar pipa dan turunkan ke dalam bushing putar. Jangan pernah menendang slip karena dapat merusak dies atau menghambat pipa.


c) Floorman ahrus mengawasi elevator atau blok untuk memastikan tidak membentur elevator atau terperangkap antara tempat jepitan slip.

d) Selalu pekerjakan tiga orang kru ketika mengatur slip untuk mencegah cidera keseleo.

e) Jangan gunakan slip untuk menghentikan pipa ketika Driller menurunkannya. Biarkan Driller menghentikan pipa dengan draw works brakes terlebih dahulu. Selanjutnya atur slip. Membiarkan slip menjalankan pipa ke master bushing untuk menghentikannya merupakan kebiasaan yang sering dilakukan yang dapat menyebabkan terjatuh ketika sedang mengaitkan pipa. Itu juga merupakan kebiasaan yang dapat berakibat pada perubahan bentuk pipa secara permanen yang memakan biaya besar.

Menarik Slip Pipa Bor
a) Angkat slip dengan telapak tangan anda menghadap atas.

b) Ketika mengangkat slips, ambil slip ke arah atas dengan menggerakkan pipa. Lepaskan slip kemudian letakkan kembali slip ajuh dari meja. Pastikan untuk menggunakan teknik mengangkat yang benar (misalnya angkat dengan kaki anda, jangan dengan punggung anda). Pastikan pijakan kaki anda kuat dan genggaman tangan anda baik sebelum mulai mengangkat.
c) Jangan pernah membiarkan slip berada di atas pipa ketika Driller mengangkat pipa keluar dari lubang sumur. Praktik seperti itu akan menambah keausan pada slip dan dapat merusak pipa. Perlakuan seperti ini juga berisiko mengakibatkan cidera jika pipa yang bergerak tiba-tiba menarik slip keluar dari meja putar.

*Perhatian – Apabila lubang tidak berada di tengah, jangan gunakan terlalu banyak tenaga. Gunakan gerakan ke atas pipa bor untuk membantu menarik slip keluar dari bushing.
0/5000
Dari: -
Ke: -
Hasil (Inggris) 1: [Salinan]
Disalin!
The use of the correct SlipSet The Drill Pipe Slips a) Install slip with your palm facing up. b) When movement of the drill pipe to the bottom of the wrap has stopped, slips around the pipe and lower into the swivel bushing. Never kick slip because it can damage the dies or obstruct pipes.c) Floorman ahrus oversees the elevators or block to make sure not to hit the elevators or trapped between the pins slip.d) Always employ a three-person crew when the set slip to prevent injury a sprain.e) do not use the pipe to stop the slip when the Driller to overthrow him. Let the Driller stop pipe with draw works the brakes first. Next adjust the slip. Let slip the pipe running to the master bushings to stop it is a habit that is often done that could cause a crash when you're hooking the pipeline. It is also a habit that may result in changes in the form of a pipe permanently cost big. Interesting Slip Drill Pipe a) lift the slip with your palm facing up.b) When lifting the slips, take a slip towards the top by moving the pipes. Remove the slip then put back slip ajuh off the table. Be sure to use the correct lifting techniques (e.g. lift with your legs, not with your back). Make sure your strong and footrest grips your hand well before starting to lift. c) never let slip are at the top of the pipe when the Driller lifting pipe out of the wellbore. Such practices will increase wear and tear on the slip and can damage pipes. This kind of treatment is also a risky result in injury if the pipes that move suddenly interesting slip out of the turntable. * Attention – if the holes are not located in the Center, do not use too much power. Use the upward movement of the drill pipe to help pull the slip out of the bushing.
Sedang diterjemahkan, harap tunggu..
Hasil (Inggris) 2:[Salinan]
Disalin!

Slip the correct usage Set Drill Pipe Slip a) Install the slip with your palms facing upwards. B) When the downward movement of the drill pipe has been stopped, slip wrap around the pipe and lower into a rotary bushing. Never kick slip because it can damage dies or impede the pipe. C) Floorman ahrus supervise elevator or the block to make sure not hit the elevator or trapped between the tongs slips. D) Always employ three crew when it set the slip to prevent injury sprain. E) Do not use slip to stop the pipeline when Driller down. Let Driller to stop the pipe with draw works brakes first. The next set slip. Let slip the pipe running to the master bushing to stop it is a habit that is often done which may cause a fall while hooking the pipe. It is also a habit that can result in permanent deformation of pipe are costly. Interesting Drill Pipe Slip a) Raise slip with your palms facing up. B) When lifting slips, take slip upward by moving the pipe. Remove the slip and then place it back slip ajuh of the table. Be sure to use proper lifting techniques (eg, lift with your legs, not with your back). Make sure your legs strong foothold and a good grasp of your hands before starting to lift. C) Never let slip is above the pipe when the pipe Driller lifted out of the pit. Such practices will increase the wear on the slip and can damage the pipeline. This treatment is also an inherent risk of injury if the pipe moves suddenly pull slip out of the turntable. * Caution - If the hole is not in the middle, do not use too much force. Use an upward motion to help pull the drill pipe slip out of the bushing.




















Sedang diterjemahkan, harap tunggu..
　
Bahasa lainnya
Dukungan alat penerjemahan: Afrikans, Albania, Amhara, Arab, Armenia, Azerbaijan, Bahasa Indonesia, Basque, Belanda, Belarussia, Bengali, Bosnia, Bulgaria, Burma, Cebuano, Ceko, Chichewa, China, Cina Tradisional, Denmark, Deteksi bahasa, Esperanto, Estonia, Farsi, Finlandia, Frisia, Gaelig, Gaelik Skotlandia, Galisia, Georgia, Gujarati, Hausa, Hawaii, Hindi, Hmong, Ibrani, Igbo, Inggris, Islan, Italia, Jawa, Jepang, Jerman, Kannada, Katala, Kazak, Khmer, Kinyarwanda, Kirghiz, Klingon, Korea, Korsika, Kreol Haiti, Kroat, Kurdi, Laos, Latin, Latvia, Lituania, Luksemburg, Magyar, Makedonia, Malagasi, Malayalam, Malta, Maori, Marathi, Melayu, Mongol, Nepal, Norsk, Odia (Oriya), Pashto, Polandia, Portugis, Prancis, Punjabi, Rumania, Rusia, Samoa, Serb, Sesotho, Shona, Sindhi, Sinhala, Slovakia, Slovenia, Somali, Spanyol, Sunda, Swahili, Swensk, Tagalog, Tajik, Tamil, Tatar, Telugu, Thai, Turki, Turkmen, Ukraina, Urdu, Uyghur, Uzbek, Vietnam, Wales, Xhosa, Yiddi, Yoruba, Yunani, Zulu, Bahasa terjemahan.

Copyright ©2024 I Love Translation. All reserved.

E-mail: